Fuel Cell Megawatt Power Generation Platform

Hydrogenic’s MW Power Plant platform is a clean, highly-reliable,
cost effective power solution for backup, stand-by, and peak shaving
stationary applications. 

Our self-contained fuel cell solution can replace or augment both renewable and
diesel generators. It can deliver DC power or can be combined with an inverter or UPS
for AC power. It uses hydrogen stored on-site or via pipeline to feed to the fuel cell architecture and its management system handles control, monitoring and safety functions.

Hydrogenics’ HyPMTM-HD30 is at the core of this modular solution. It provides peak
efficiency greater than 50% with small footprint, high run time capabilities, unlimited start-stop cycling, no water for humidification and no nitrogen for shutdown is required.

Hydrogenics’ HyPMTM Racks lead the industry for power delivery on a volume and
weight basis.

Product Specifications1
Type PEM (Proton Exchange Membrane) Fuel Cell Power Generator
Performance Electrical Output Continuous 1 MWe
Electrical Efficiency >50% LHV at BOL
System Output Voltage 380 – 480 VAC
System Output Frequency 50 – 60 Hz
Package Design Life 20 years with LTSA
Physical Characteristics Dimensions (H x W x L) 9.6 x 8 x 40 feet (x2)
Weight 32,000 kg
Fuel Hydrogen2 >99.99%
Fuel Consumption 750 Nm3/h per 1MW3
Aux Electrical Input Power 30 kW continuous,
40 kW at start-up
Available Heat Output Heat Load < 1.5 MW
Stack Temperature Up to 70°C
Exhaust Gas Temperature 70°C
Emissions Noise level at 1m Approx. 75dB in open air
Pollutants Zero emissions
(No GHG or local air pollutants)

1 Conditions: Inlet air temperature: 15°C | Atmosphere pressure: 101.3 kPa
2 Fuel type: Hydrogen according to ISO/TS 14687-2:2008(E)
3 Cumulative average. Fuel consumption calculated for reference only. Actual fuel consumption may vary.

Kolon MW Power Plant

To learn more about Hydrogenics’ Megawatt Power Generation Platform, please contact us.